LP REGULATOR HOSE 60 CM
LP Low pressure hose for regulator 60 cm length. Connecting the first stage to the second stage regulator.
LP Low pressure hose for regulator 60 cm length. Connecting the first stage to the second stage regulator.
Twinset Steel Cylinders 7, 10, 12, 12 concv, 15 ,18 20 liter long options, 200 bar, DIR Style with stainless steel tankbands and rubber knobs
LP low pressure regulator hose 100 cm length. Connecting the first stage to the second stage regulator.
The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.
Steel helmet of the Faber brand of 5 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar
LP low pressure regulator hose 150 cm length. Connecting the first stage to the second stage regulator.
13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere
10-liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar
LP low pressure regulator hose 210 cm length. Connecting the 1st stage to the second. Ideal for twin cylinders type DIR configurations.
AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.
Low pressure hose for regulator with braided outer coating. Color black. Length 100 cm.
KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.
15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. 200 Bar working pressure (makes it lighter than the 232 Bar model)
Low pressure hose for regulator with braid outer coating. Color black. Length 210 cm.
The BR67 is a medium sized breaker in Stanley Hydraulic Tools line up of underwater paving breakers. The BR67is in the 70 lbs class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving.
15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 232 Bar
The BR45 is the smallest breaker in the Stanley Hydraulic Tool lineup of underwater breakers. The feathering on/off valve controls speed and allows easier initial tool placement. Standard 1" hex chuck and latch retainer. Painted hi‑visibility yellow.
Steel helmet of the Faber brand of 18 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 220 Bar
The Stanley Submarine CH15 Breaker Hammer is a lightweight yet powerful alternative to pneumatic tools. Designed for medium and heavy duty jobs, due to its high power to weight ratio the CH15 becomes the ideal tool for scuba divers working in concrete.
The Stanley Hidraulica Submarine CO23 Circular Saw was designed for use underwater, but it is also a very useful tool on land. The CO23 uses wet or dry abrasive diamond discs, with a standard 10 inch (25.4 cm) diameter for cutting metals or concrete.
The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.